EOT Crane Weighing System | GRAMTON

EOT Crane Weighing System

Load-pin sensor fitting in Pulley..
And Weighing Controller device with Overload safety facility


Download E-Broucher

Gramton make EOT crane weighing systems comes with high accuracy and based on customized weighing sensor. This system is very useful for applicants such as hot metal or scrap handling, as the load pins are impermeable to shock loading and being the high temperature of molten metal is substantially reduced at the load pin location. A combination of Digital controller, Load Pin and Remote Display are widely used for weighing systems on EOT cranes. The weight lifted by the crane hook can be seen on 4 inch Remote Display in the cabin as well as from the shop floor below. Overload Protection system is built-in in the system by default as a special consideration.

Applications
• Forging Industry
• Automobile
• Steel Industry

Salient Features
• Customize design and feature availability
• Efficient performance
• Low Deflection
• High accuracy with Safety Alarm
• The customized load pins to be fitted in the equalizer pulley
• Calibration and set points are very easy to set by the user
• Tare facility
• 100% safe overload protection
• Wire rope slack condition

Technical Specification
Capacity 1 Ton to 200 Ton
Accuracy ± 1%
Operating temp Up to 1800°C
Power supply required 230V, 50Hz, Single Phase
Excitation Voltage + 5 Volt DC
Output 1 MV/Volt
Input Resistance 400 Ohm
Output Resistance 350 Ohm
Output Resistance Overload Protection 150 %
Non-Linearity < ± 5.0 %
Creep (30 minutes) < ± 0.03 % FSO
No. of Load cells Varies with the pulley configuration
Duty Continuous

Optional Accessories
- LED Remote jumbo display

Model Capacity Accuracy Pan Size Plotter (MOC)